Single acting cylinder
By connecting a sufficiently high pressure load, the piston of the cylinder is extended to its stop. To move the piston back, an external force must be applied.
Adjustable parameters
Designation |
Range |
Default value |
Piston diameter |
1 ... 1000 mm |
16 |
Piston rod diameter |
0 ... 1000 mm |
10 |
Piston Position |
0 ... 5000 mm |
0 |
Maximum stroke |
1 ... 5000 mm |
200 |
Mounting angle |
0 ... 360 deg |
0 |
Cylinder friction
Designation |
Range |
Default value |
Break-away force |
0 ... 10000 N |
65 |
Coulomb friction force |
0 ... 10000 N |
55 |
Viscous friction |
0.1 ... 10000 N.s/m |
215 |
Cylinder mass
Designation |
Range |
Default value |
Moving mass |
0.01 ... 1000 kg |
0.3 |
Designation |
Range |
Default value |
Leakage |
0 ... 10 l/(min.bar) |
0 |
Spring pressure at x=0 |
0 ... 40 MPa |
0.4 |
Spring pressure at x=x_max |
0 ... 40 MPa |
1 |
Damping length |
0 ... 100 mm |
10 |
Calculated parameters
Designation |
Range |
Default value |
Piston area |
0 ... 10000 cm2 |
2.0106 |
Ring area |
0 ... 10000 cm2 |
1.2252 |
Failure models
Failure model |
Description |
Internal leakage |
An internal leakage occurs. The value can be adjusted. |
High friction |
A high friction occurs at the piston. The value of the friction can be adjusted. |
Parameter
Designation |
Range |
Default value |
Leakage |
0 ... 1000 l/(min.bar) |
0.035 |
Viscous friction |
0 ... 10000000 N.s/m |
10000 |