Negative edge-triggered monoflop
If there is an edge from 1 to 0 at input I of the negative edge-triggered monoflop, the output Q1 is set to 1 for a time t. After expiration of t, the output is reset to 0 automatically. A distinction is made between non-retriggerable and triggerable monoflops. With retriggerable monoflops, the cycle time t restarts with a new edge.
Q1 = not Q2 always applies for the outputs.
Adjustable parameters
Designation | Range | Default value |
---|---|---|
Delay time | 0.001 ... 10000 ms | 10 |
Retriggerable | false |
Designation | Range | Default value |
---|---|---|
Voltage level (lo) | 0.1 ... 24 V | 0.8 |
Voltage level (hi) | 0.1 ... 24 V | 2 |
Designation | Range | Default value |
---|---|---|
Voltage level (lo) | 0 ... 24 V | 0 |
Voltage level (hi) | 0.1 ... 24 V | 5 |
Resistance | 0.1 ... 1000 Ohm | 50 |