Plug and socket
The connection between plug and socket can be disconnected both in edit mode and during simulation.
During simulation, a click on the symbol changes the connection state.
Adjustable parameters
Designation | Range | Default value |
---|---|---|
Plugged in | true |
Failure models
Failure model | Description |
---|---|
Current interrupted | The line is interrupted and current cannot flow. |
Faulty resistance value | The resistor specified in the failure configuration is used, in order to simulate an excessive resistance for example. |
Short circuit to ground | The conductor is connected directly to ground (0V potential) and can trigger a short circuit. |
Designation | Range | Default value |
---|---|---|
Resistance | 1e-3 ... 1E8 Ohm | 100 |