Pressure sensor with switching outputs and display
The pressure sensor is a piezo-resistive relative pressure transducer with integrated amplifier and built-in temperature compensation. The pressure to be measured is transferred to a piezo-resistive element via a silicone layer. The signal change generated in the element is output as a switching signal at the connector plug via an integrated amplifier.
The pressure sensor has two compressed air connections, each of which is assigned an independent sensor element. The measured input values (In A/In B) are output via two configurable switching outputs (Out A/Out B). The measured pressure is shown numerically and graphically on the display.
Adjustable parameters
Designation | Range | Default value |
---|---|---|
Output function | Make switch, Break switch | Make switch |
Switching function | Threshold value, Window comparator | Threshold value |
Switching pressure 1 | -0.1 ... 2 MPa | 0.3 |
Switching pressure 2 | -0.1 ... 2 MPa | 1 |
Hysteresis | 0 ... 2 MPa | 0 |
Designation | Range | Default value |
---|---|---|
Output function | Make switch, Break switch | Make switch |
Switching function | Threshold value, Window comparator | Threshold value |
Switching pressure 1 | -0.1 ... 2 MPa | 0.3 |
Switching pressure 2 | -0.1 ... 2 MPa | 1 |
Hysteresis | 0 ... 2 MPa | 0 |
Designation | Range | Default value |
---|---|---|
Minimum voltage | 1 ... 300 V | 13 |
Idle current (24 V) | 1 ... 10000 mA | 32 |